AlCu alloy

用法例句

The study of microstructure and mechanical properties of high strength and toughness casting Al-Cu alloy;

高强铸造铝铜合金显微组织与力学性能的研究

Influence of process parameter of MIG welding on the weld of Al-Cu alloy;

工艺参数对MIG焊铝铜合金焊缝组织的影响

Effects of electromagnetic stirring on the shape,structure and mechanical properties of pulse metal inert gas(MIG) weld of 2219 Al-Cu alloy were investigated.

研究电磁搅拌对2219铝铜合金脉冲MIG焊焊缝形状、组织及性能的影响。

Current status of anodic oxidation of aluminum-copper alloy;

铝铜合金阳极氧化发展概况

In low concentration mixed solutions,a silvery white film with excellent appearance and higher hardness and thickness was obtained on aluminum-copper alloy difficult to anodize by using grading voltage and high temperature.

在低浓度复合电解液中,利用分阶段升压技术,高温下在阳极氧化较难的铝铜合金LY 12上制备了具有较高厚度、硬度和良好外观的银白色氧化膜层。

The content of copper residue on the surface of the electrolytic capacitor cathode foil of aluminum-copper alloy is usually more than 50 mg/m2.

利用铝铜合金电子铝箔生产的铝电解电容器用阴极箔的表面附着铜含量一般高达50mg/m2以上。

The copper-aluminum alloy was prepared by infiltration with the methods of copper powder compact wrapped by aluminum sheet and embed in aluminum powder.

采用铝片包裹和铝粉包埋铜粉压块的方法,通过熔渗制备铜铝合金,铝片包裹法在真空、空气及氩气气氛下进行实验,铝粉包埋法在氩气气氛下进行实验,温度为750℃,保温6h。

Research on correlation between Streptococcus mutans adhesion and surface roughness of Cu-Al alloy and Co-Cr alloy;

变形链球菌黏附对铜铝合金、钴铬合金表面粗糙度影响的初步研究

The complicated procedure and high cost of internal oxidation of aluminum in Cu-Al alloy have severely limited the widespread application of high-quality copper strengthed by nanometer alumina through internal oxidation of aluminum in Cu-Al alloy.

研究了铜铝合金内氧化与外氧化的条件,提出了氧化层厚度的动力学模型。

According to researching technical speciality of Al-Si-Cu alloy,making choice of fit clearance of die casting mould shaped part is necessary,then in virtue of mould temperature-controller and midway anneal measure gains the results of increasing quality of die casting and prolonging service life of mould.

通过对铝硅铜合金工艺特性的研究，提出选定合理的压铸模成形零件配合间隙的必要性，并借助模具温控装置、模具中间退火等工艺措施，达到既提高压铸件的质量，又延长压铸模使用寿命的目的。

vacuum cleaner alloy

真空吸尘器用铝铜合金

Study on Die Casting Technology of High Strength and High Toughness Al-Cu Alloys;

高强韧铝铜合金压铸成形技术的研究

Study on Strengthen and Toughening Mechanism of Al-Cu Alloys Casts Formed by Squeeze Casting;

挤压铸造铝铜合金强韧化机理的研究

Effect of Ce on Structure of ZL201 Alloy

稀土Ce对铸造铝铜合金ZL201组织的影响

Double Aging Peaks Phenomenon of Al-Si-Mg Alloys and Electrochemical Characterization on Age of Al-Cu Alloys;

铝硅镁合金时效双峰现象与铝铜合金时效电化学表征

Nippon duralumin

日本高强度铝铜镁合金

typewriter alloy

打字机用铜镍铝型合金

Aluminum, copper, and the alloys, Bronze and Brass, are common non-ferrous metals.

铝、铜、合金、黄铜等是常用的有色金属。

373 Copper, zinc, lead, aluminium, bronze and brass are nonferrous metals or alloys.

铜、锌、铅、铝、青铜和黄铜都是有色金属或合金。

Brazing of aluminum and aluminum-base alloys is accomplished with the aluminum-silicon brazing alloys.

铝和铝基合金的铜焊是用铝―硅铜的合金来完成的。

Copper or aluminum and its alloy bus bars for electrical purposes--Part 3: Aluminum bus bar

GB5585.3-1985电工用铜、铝及其合金母线第3部分:铝母线

Zn, Al, Cu, Mo, Pb, carbon steel, stainless steel, Alumina, Babbitt and so on.

锌、铝、铜、钼、铅、碳钢、不锈钢、氧化铝、巴氏合金等。

Rectangular copper or aluminum and its alloy conductors for electrical purposes--Part 4: Copper strip

GB/T5584.4-1985电工用铜、铝及其合金扁线第4部分:铜带

Copper or aluminum and its alloy bus bars for electrical purposes--Part 2: Copper bus bar

GB5585.2-1985电工用铜、铝及其合金母线第2部分:铜母线

Copper and copper alloys--Determination of aluminium content

GB/T5121.13-1996铜及铜合金化学分析方法铝量的测定

promethium alloy

普罗米修含铝锌黄铜合金

Low Ni High Mn Cu-Al Alloy Bush for Hot Plate Mill

低镍高锰铜铝合金轴瓦新材料的研究

Determination of Iron,Aluminium,Manganese,Lead and Stannum in Copper Alloy by ICP-AES;

ICP-AES法测定铜合金中铁、铝、锰、铅、锡