Homogenizing anneal

用法例句

Influence of homogenization on flow stress of Al-1Mn-1Mg alloy during hot compression deformation;

均匀化退火对Al-1Mn-1Mg合金高温压缩流变应力的影响

Influence of homogenization on morphologies of the precipitated phases in Al-1Mn-1Mg alloy;

均匀化退火对Al-1Mn-1Mg合金中析出相形态的影响

Influence of melt-treatment and homogenization on microstructure and mechanical properties has been studied systematically and deeply with the aids of some modern .

借助光学显微镜(OM)、扫描电镜(SEM)、透射电镜(TEM)、能谱仪(EDAX)、X射线衍射(X-Ray)、电子拉伸机等先进的分析测试手段,系统深入地研究熔体处理与均匀化退火工艺对易拉罐用铝材微观组织与力学性能的影响规律,在此基础上采用动态热/力模拟试验技术,全面深入地探讨了易拉罐用铝材的熔体处理、热处理工艺、热塑性变形行为三者之间的相互关系,深化了对铝熔体处理的基本理论、冶金缺陷的作用机理以及铝材高温塑性变形理论的认识,对进一步挖掘易拉罐用铝材的性能潜力具有重要意义,可为实际热轧工艺的确定和优化提供试验依据与理论指导。

Effect of homogenizing annealing on microstructure and mechanical properties of AZ91D magnesium alloy;

均匀化退火对AZ91D镁合金组织与性能的影响

Effects of homogenizing annealing on microstructure and properties of hypereutectic Al-17Si alloy

均匀化退火对过共晶Al-17Si合金组织和性能的影响

Effect of various homogenizing annealing process on the microstructure and mechanical properties of high strength and heat resistance Al-Cu-Mg-(Ag)-Mn-Zr alloy were investigated by differential thermal analysis,metallurgical structure observation,thermal simulation and tensile test.

通过差热分析(DTA)、金相组织观察、热模拟及拉伸试验等手段,分析了不同均匀化退火工艺对含Ag的Al-Cu-Mg-(Ag)-Mn-Zr新型耐热铝合金的微观组织和力学性能的影响。

The homogeneous annealing proceeded.

研究了NdFeB合金的铸锭组织,并对NdFeB合金进行了均匀化退火。

Effect of homogenization annealing process on heat deformation behavior of ZM21 magnesium alloy

均匀化退火工艺对ZM21镁合金热变形行为的影响

Effect of homogenization annealing process on textures and earing rate of 1100 aluminium sheet was investigated using orientation distribution functions(ODF).

用晶体取向分布函数研究和分析了均匀化退火对1100铝带材织构的影响;比较了(560~580)℃×16 h、(520~550)℃×9 h两种均匀化退火工艺下得到的铝带材的织构组成。

Optimization for chemical composition standard,homogenization annealing,extrusion process,holding time and aging of 6082 aluminum alloy extruded profile are introduced in the paper.

介绍了6082铝合金挤压型材的化学成分内控标准、均匀化退火、挤压工艺、停放时间、时效等方案的优选,合理设计了生产工艺制度,使产品达到6082铝合金型材的质量要求,满足FAST结构项目的需要。

Effect of homogenizing on microstructure and mechanical properties of 32Cr2Mo2NiVNb steel;

均匀化退火对32Cr2Mo2NiVNb钢组织和性能的影响

In order to improve the forming property of twin roll casting magnesium alloy sheets AZ31B, homogenizing treatment was carried out at different annealing temperature (300,350,400℃) and the holding time (1,2,3 h).

为提高双辊铸轧AZ31B镁合金薄板的成形性能,在不同退火温度(300、350、400℃)和保温时间(1、2、3h)下对铸轧AZ31B镁合金薄板进行均匀化退火试验。

However,few research have been done on the effect of homogenizing treatment on the precipitation of Er modified 5083 alloy.

3Er(5083)合金均匀化退火过程中析出的Al_3Er相的显微组织进行了透射电镜观察。

TEM OBSERVATION OF THE Al_3Er PHASE DURING HOMOGENIZING OF THE 5083 ALLOY WITH Er ADDITION

含Er 5083合金均匀化退火过程中Al_3Er相的TEM观察

Effect of homogenization annealing process on heat deformation behavior of ZM21 magnesium alloy

均匀化退火工艺对ZM21镁合金热变形行为的影响

Effects of homogenizing annealing on microstructure and properties of hypereutectic Al-17Si alloy

均匀化退火对过共晶Al-17Si合金组织和性能的影响

Study on Microstructure of A1-Mg-Si-Cu-Mn Alloy As-cast and Homogenized Annealing

一种A1-Mg-Si-Cu-Mn合金铸态及均匀化退火组织研究

Study on Heat Treatment Techniques for Homogenizing the Annealed Structure of H13 Steel

H13模块退火组织均匀化热处理工艺试验研究

The Causation Analyzing and Improving for Non-uniformity of the Small Size ML08AI when Annealing

小规格ML08Al退火不均匀原因分析与改进

Numerical study on furnace temperature uniformity of annealing furnace with high speed burners

高速烧嘴退火炉炉温均匀性数值研究

An Investigation of Temperature Uniformity in Fine Annealing Leer for Optical Glasses

光学玻璃精密退火炉的炉温均匀性研究

Effects of CdCl_2 solution soaking treatment on uniformity of CdTe solar cells

CdCl_2溶液渗透退火对CdTe太阳电池均匀性的影响

Homogenization of a Class of Degenerate Elliptic and Parabolic Equations;

一类退化椭圆问题和抛物问题的均匀化

A Fast SA Algorithm for the Design of DOE for Uniform Illumination

一种用于均匀照明的衍射光学元件设计的快速模拟退火法

The demagnetizing field and factor of uniformly magnetized cylinder

轴向均匀磁化圆柱形磁介质的退磁场和退磁因子

A Numerical Simulation Approach to Fire Distribution Optimization in Shooting Uniformly Distributed Group Targets

均匀分布集群目标射击火力分配优化数值仿真方法

inhomogeneity of carbide

碳化物不均匀性级别

The population density is evened out.

种群密度亦趋于均匀化。

After annealing, however, both the notched and precracked specimens have a ductile tendency.

经退火后,材料的缺口和预制裂纹试样均呈现韧化倾向。

MOLECULAR DYNAMIC SIMULATION OF THE HOMOGENEOUS AND NON-HOMOGENEOUS NUCLEATION OF ARGON VAPOR

氩蒸气均匀核化与非均匀核化的分子动力学模拟

You must tip roller with refractory coating before use.

使用前应在辊棒表面均匀涂上耐火涂层。