Sheet moulding compounds(SMC) for general purposes

用法例句

Study on flame-retardance of sheet molding compounds and its preparing;

新型阻燃片状模塑料的制备及其性能研究

The polyurethone prepolymer was used as thickener to thicken hydrol-terminated unsaturated polyester, and a new sheet molding compounds (SMC) of unsaturated polyester was prepared.

采用聚氨酯预聚物作增稠剂对带端羟基的不饱和聚酯进行增稠,制备出一种新型的不饱和聚酯片状模塑料(SMC),并研究了其增稠性能、增韧性能及贮存稳定性。

The effect of glassfiber cloth,short glass fiber and calcium carbonate on mechanical properties of unsaturated polyester sheet molding compounds was studied.

研究了玻纤布、短切玻纤及碳酸钙对不饱和聚酯片状模塑料力学性能的影响,实验发现:玻纤布增强不饱和聚酯片状模塑料的力学性能比短切玻纤好,随着玻纤含量的增加,不饱和聚酯片状模塑料的拉伸强度先增加,达到一极大值之后减少。

Sheet molding compound (SMC) is a thermosetting material made of unsaturated polyester resin, organic additives, the initiator, calcium carbonate, thickener and chopped glass fibres strands that are mixed and form sheets.

片状模塑料(Sheet Molding Compound，简称SMC)是一种加入不饱和聚酯树脂、有机添加剂、引发剂、碳酸钙、增稠剂和短切玻璃纤维等组分混合而成的热固性复合材料。

The effects of dense packing fillers on the processing properties such as paste viscosity,mechanical properties and surface qualities of the sheet molding compound(SMC) products were investigated.

根据填料球-球双峰堆砌理论,通过激光粒度分析仪测定了几种不同比例填料复合后的粒径分布,使用连续级分法计算复合后填料的空隙率,得到了可实现密堆砌填料的类型和复合比例;通过测试树脂糊黏度、片状模塑料(SMC)试样的力学性能以及模压产品的表面波纹,研究了密堆砌填料对SMC生产的工艺性、力学性能以及模压产品表面质量的影响。

The possibility of Taihu Lake silt applied for the sheet molding compound filler was studied from the silt chemical and physical properties and its structure.

为了将太湖淤泥用作片状模塑料复合材料的填料,从淤泥物化性能和结构特征对太湖淤泥进行了表征和分析。

The effect of different type of resins and low-profile additives and flame resistance reagents on the mechanical and flame resistance performance of Sheet Molding Compound(SMC) were studied by orthogonal tests method in this paper.

本文运用正交设计的实验方法,研究了不同树脂体系、低轮廓添加剂体系以及阻燃剂体系对SMC材料力学性能和阻燃性能的影响;通过测试拉伸强度和氧指数,确定了高阻燃片状模塑料的最佳配方组成,并对ATH实现高阻燃效果进行了分析。

Research on Thickening Process of Low Pressure Sheet Molding Compound;

低压片状模塑料增稠工艺研究

The thickening technique of phenolic sheet molding compound and its thickening mechanism were studied in this paper.

研究了新型酚醛片状模塑料（Ｐ－ＳＭＣ）的增稠技术及增稠机理。

The thickening agent of phenolic sheet molding compound and its thickening mechanism were studied in this paper.

本文通过粘度实验，研究了酚醛片状模塑料（Ｐ－ＳＭＣ）的新型增稠剂。

Sheet moulding compounds(SMC) for general purposes

GB/T15568-1995通用型片状模塑料(SMC)

THE POSSIBILITY OF TAIHU LAKE SILT APPLIED FOR SHEET MOLDING COMPOUND FILLER

太湖淤泥用作片状模塑料填料的探讨

Study on Fiber Reinforced Epoxy Sheet Molding Compound

模压成型纤维增强环氧片状模塑料的研究

Research on the Manufacture of Films of Low Pressure and Flame-retardant Sheet Molding Compound;

低压成型阻燃片状模塑料的制备与研究

Development of Dedicated Film-former in Sizing Agent for SMC Rovings

通用型SMC浸润剂专用成膜剂的研制

Study on the Properties and Molding Theory of Low Pressure Molding Compounds;

低压片状模塑料性能及模压理论研究

Selection and Molding Technology of SMC Used for Railway Outside Case

铁路室外箱盒用SMC材料的选用和成型工艺

Positive Research of SMC Model in the Application of Customer Potential Value Finding;

SMC模型在客户潜在价值发现的应用实证研究

The shape of the die decides the shape of the extruded plastic-a fibre, perhaps, for use in nylon thread, or a tube.

模口的形状决定了挤出塑料产品的型状，如制尼龙绳用的纤维丝或塑料管。

floor covering of plastics in rolls or tiles, whether or not self-adhesive

塑料铺地用品,成卷或砖片状；墙面或天花板塑料贴饰材料

Study on Latent Curing Agent of Epoxy Resin Sheeting Molding Compounds;

环氧树脂片状模塑料潜伏性固化体系研究

ELECTROFORMING TECHNOLOGY OF INJECTION MOLD CAVITY WITH THE ORIGINAL PLASTICS PRODUCT AS MOLD CORE

用原塑料制件为模芯电铸注塑模型腔工艺

Study on r-PET/PC Engineering Plastics Alloy Prepared from Recycled PET Bottle Flakes

用废饮料瓶片制备r-PET/PC型工程塑料的研究

Modified migration model of chemical substances from paper through plastic coating layer and its universality

纸塑复合包装材料中化学物迁移的改进预测模型及其通用性

Cuttings are cast into blocks in plastic and thin-sectioned in the usual way.

（岩）屑用塑料铸成块并用通常的方法制成薄片。

The rotating slipring is insulated from the shaft by a laminated plastic bushing.

旋转滑环是用片状塑料衬套与轴绝缘的。

Numerical Simulation and Optimization in Aspheric Optical Plastic Lens Injection Molding;

塑料非球面光学镜片注塑成型数值模拟与工艺优化

Application of Elastic Viscoplastic Thermal Material Model in the Simulation of H-beam Hot Rolling Process

弹粘塑性材料模型在H型钢热轧模拟中的应用