deformationstress dependencies

用法例句

Through shape analysis of the large size water turbine after patching weld, and considering the conditions of worksite, the idea of variable force shape following up grind is presented in this paper.

通过对大型水轮机转轮补焊后的形状特征的分析，结合现场条件，提出变力随形磨削的设想，模拟修磨工况，完成了原理性试验，证明了恒力随形和变力修形可以分别控制并能有机的结合，是大型转轮补焊后修磨的可行方

Analysis of stress deformation and slope stability for fitting-slope CFRD;

贴坡型混凝土面板堆石坝应力变形及坝坡稳定分析

The reasons why plastics parts produced stress deformation were analyzed.

对注塑件产生应力变形的原因进行分析,指出了注塑件应力变形的内在因素主要是不同注塑件原料对注塑工艺参数的敏感度不同所致;外在因素是模具结构设计对注塑件应力变形的影响;从模具设计方法和注塑工艺上给出了解决注塑件应力变形的几个有效对策,并通过实际例子证明这几个对策是简单有效的。

The developing results of optimizing structures of diamond segments and blades abroad and home are summarized, and features, advantages and disadvantages of various blade structures to decrease side wears and stress deformations or improve cooling performance are analyzed.

综合介绍了国内外优化金刚石圆锯片基体及锯齿结构的有关成果 ,分析了各种防侧面磨损、防应力变形、改善冷却性能的锯片基体及锯齿结构的特点、生产价值及存在问

The formula of eliminating facial contacted wire rope deformation stress is put forward.

面接触钢丝绳的生产有拉拔法、轧制法、锻打法 3种 ,阐述其适用范围及各自的特点 ,提出消除面接触钢丝绳“变形应力”的公式 ,指出在油井上使用的柔性抽油杆用面接触钢丝绳和面接触录井钢绞线 ,用连续锻打法生产较为有利。

According to the control of cracks in large concrete,this paper discusses the characteristics of reinforced concrete under deformation stress.

文章针对大体积砼产生裂缝的控制,论述了钢筋砼承受变形应力的特点。

On the stress and deformation of cut-off wall in the deep overburden;

深厚覆盖层上混凝土防渗墙的应力变形特性

Verification of numerical simulation results of stress and deformation of core-wall dams;

心墙坝应力变形数值模拟结果验证

Effective stress method of stress and deformation for soil-rock fill dam after water impounding;

蓄水后土石坝应力变形有效应力算法

A NEW TOTAL STRESS METHOD FOR CALCULATION OF STRESS AND DEFORMATION OF CORE IN ROCK-FILL DAMS

堆石坝黏土心墙应力变形的总应力法计算

The Study on Stresses and Deformations of Concrete-face Rock Fill Dam;

混凝土面板堆石坝应力变形特性研究

stress-formation diagram

胁强[应力]-形变图

extrusion stress

(塑性变形的)挤压应力

Deformation in which stress and strain are proportional is called elastic deformation.

应力与应变成正比关系的形变称为弹性形变。

Analysis of Stress and Strain in the Flange of a Cup-shaped Part during Deep Drawing

杯形件拉深工艺过程中变形区的应力应变分析

Research on Flow Stress Behavior of Super Alloy GH4145 During High Temperature Plastic Deformation

GH4145高温合金热塑性变形流变应力研究

Flow stress behavior of 2026 aluminium alloy under hot compression deformation

2026铝合金热压缩变形流变应力行为

Study on flow stress of AZ80 magnesium alloy during hot compression deformation at elevated temperatures

AZ80镁合金高温热变形流变应力研究

Analysis on Measurement Results of Stresses and Strains of Concrete Retaining Walls of "U"-shaped Road Channel

U形槽混凝土挡墙应力、应变测试分析

Stress-Strain Model of Confined Concrete in T-Shaped Columns

T形柱中约束混凝土的应力应变模型

Stress and deformation of filament-wound thick-wall cylinder pressure vessels

纤维缠绕厚壁柱形压力容器的应力和变形

Stresses applied to plastically deform the metal are usually compressive.

适用于金属塑性变形的应力通常都是压应力。

Deformation characteristics of coarse-grained materials during cyclic loading of deviatoric and spherical stresses

偏应力和球应力往返作用下粗粒料的变形特性

The effect is customarily called centrifugal distortion.

这种效应通常叫做离心力形变。

THE STRESS AND DEFORMATION OF bridge BAR OF QUASI-BRITTLE MATERIAL CRACK

准脆性材料裂纹桥联筋的应力与变形

The Study of Stress Relaxation of X7CrNiMoBNb16-16 with Thermo-mechanical Treatment;

X7CrNiMoBNb16-16形变热处理对应力松弛的影响

Prediction of Welding Deformation & Residual Stress by FEM;

用有限元法预测焊接变形和残余应力