direct sintering

用法例句

In order to obtain the best synthesis temperature of cordierite by the method of direct sintering, samples were synthesized with pressed raw blocks respectively at controlled temperatures of 1310℃,1350℃ and 1400℃.

为了研究采用直接烧结法合成堇青石的最佳合成温度,对压成的生料块分别在最高合成温度为1300℃,1350℃,1400℃下进行合成,通过对比不同合成温度下得到的样品X射线衍射图,确定出采用直接烧结法合成堇青石的最佳合成温度。

Study on lead-free (Bi_(0.5)Na_(0.5))_(1-x)Ba_xTiO_3 piezoelectric ceramics by direct reaction sintering method;

直接反应烧结法制备(Bi_(0.5)Na_(0.5))_(1-x)Ba_xTiO_3系无铅压电陶瓷的性能研究

As an important branch of SLS, the direct metal laser sintering (DMLS) technology can manufacture metal parts with any geometry shape directly.

因此，建立金属粉末直接激光烧结过程的数学、物理模型，定量研究DMLS烧结致密化过程中的烧结行为和组织结构变化，成为粉末冶金科学与工程研究中的重要内容之一。

Commercial test of direct recovery of alumina and soda in Sintering process

烧结法硅渣直接烧结回收氧化铝和碱工业试验

Fabrication of Al_3Ti Powder by Sintering Directly and its Reaction Mechanism

直接烧结法制备Al_3Ti粉末及反应机理的研究

Microstructure and Mechanal Property of Samples Prepared by DLMS with FGH95 Powder

FGH95粉末激光直接烧结的微观组织及力学性能

Study on Direct Selective Laser Sintering of Ni-Based Metallic Powder and Key Technologies;

Ni基金属粉末激光直接烧结成形及关键技术研究

3D Finite Element Simulation of the Temperature Field and Experiment Study on Direct Metal Laser Sintering;

金属粉末激光直接烧结温度场的三维有限元模拟及实验研究

Commercial Exprement and Production on Using Steel Making Directly Sludge into Sintering Directly;

炼钢污泥直接混入烧结的试验与生产

Numerical Simulation and Sintering Zone Prediction of Direct Laser Sintering of Multi-component Metal Powders

多组元金属粉末直接激光烧结过程数值模拟及烧结区域预测

Research on Direct Laser Metal Sintering of Nickel-based Metal Powder Material;

直接激光烧结镍基高温合金的工艺研究

Experimental Investigation on Direct Metal Laser Sintering of Nickel-based Metal Powder Material

镍基高温合金粉末直接激光烧结实验研究

direct gas-heating system

煤气直接燃烧加热系统

direct-heating gas burner

直接加热煤气灯,直接加热煤气燃烧器

A series of experiments were carried out with direct metal laser sintering (DMLS) for the 316 stainless steel powders.

采用直接金属激光烧结的方法，对316不锈钢粉末进行了一系列烧结实验。

This resulted in a rough and bead-shaped surface, obstructing a smooth layer deposition.

球化的出现妨碍了直接金属激光烧结成形的顺利进行。

Research on the Numerical Simulation and the Structure Optimization of the Tiny-oil Ignition Burner

燃油气化燃烧直接点火的数值模拟和结构优化研究

direct-fired downhole steam generator

直接燃烧式井下蒸汽发生器

Design of direct programming based on CCS DSP external Flash

基于CCS的DSP片外Flash直接烧写设计

a direct result, link, connection

直接的结果、 关系、 联系

not as a direct effect or consequence.

不作为直接影响和结果。