drilling pump

用法例句

Material Selection and processing of small gear shaft in drilling pump;

钻井泵小齿轮轴的选材与加工

Application of demodulated resonance and fuzzy distinguishing technique to fault diagnosis of bearings in drilling pump;

共振解调和模糊识别技术在钻井泵轴承故障诊断中的应用

To meet test requirement for larger power and ultra-high pressure mud pump(52 MPa),a new AC VFD test stand is designed and developed to upgrade the testing capability.

针对大功率、超高压(52 MPa)钻井泵的试验问题,设计了采用交流变频控制技术,提高试验能力的试验台架。

After carefully researched the actual problem, we designed the power switch system for the mud pump electric power system of 70DS.

从钻井生产中所遇到的实际问题出发,设计出了一套可以满足实际生产需求的电动钻机钻井泵用动力切换装置,是解决问题的有效办法。

When using the mud pump in the oilfield,the high pressure mud often damages the valve covers due to erosion or stab action,such result in mud ejecting leakage,which makes the mud pump stop working for repairing.

钻井泵在使用中经常出现高压泥浆冲蚀或刺坏阀盖喷射泄漏事故,造成钻井泵停机维修。

A bimetal drill pump liner with outer layer of carbon steel and inner layer of high chromium cast iron 17CrMoCu was manufactured by centrifugal casting.

利用复合离心铸造工艺制备了碳钢/高铬铸铁双金属复合材料钻井泵缸套,确定了复合离心铸造的工艺参数,设计了阶梯升温的热处理工艺,并对内套材料的组织和性能进行了测试。

Testing method of the impacting force of drilling pump valve in the course of valve closing;

钻井泵阀冲击力的应变测试方法

In view of the characteristic of severe erosion and abrasion in the drilling pump valve,the flow field of the play of it by FLUENT was simulated and computed in this paper.

针对钻井泵阀冲蚀磨损严重的特点,利用FLUENT软件对钻井泵阀隙内流场分布进行了仿真计算,得到阀隙流场在某一时刻泥浆流速的分布规律。

According to the impact fatigue failure appeared in drilling pump valve,the mechanical characteristic and effect degree of the maximum stress concentration spot when the impact of pump valve happens were mainly studied,hence a non-impact working condition of drilling pump valve based on the effects of stress concentration was put forward.

针对钻井泵阀的冲击疲劳破坏,重点研究了泵阀冲击时产生最大应力集中部位的受力特征及其影响程度,提出了基于应力集中影响的钻井泵阀无冲击工作条件。

Application and analysis of surface engineering technology on drilling pump liner;

表面工程技术在钻井泵缸套中的应用分析

Wear-resistance of the drilling pump liner in oil industry is one of the key factors to the service life.

石油钻井泵缸套的耐磨性能是影响其使用寿命的主要因素之一,如何提高其耐磨性是解决问题的关键。

The surface of 45 steel drilling pump liner was modified by plasma spraying and the ceramic coating of the liner was prepared.

利用等离子喷涂技术对45号钢钻井泵缸套表面进行改性,制造金属陶瓷涂层缸套。

Pump Pressure Analysis of the 3NB2200 High Efficiency Well Drilling Pump

3NB2200型大功率钻井泵的泵压分析研究

A Side Issue in Volume calculation of the Surge Chamber for Slush Pumps

钻井泵空气包体积计算中的一个问题

FINITE ELEMENT ANALYSIS FOR THE CASING OF A 1300 HP SINGLE ACTION TRIPLEX DRILLING PUMP

胜利1300马力钻井泵壳体的有限元分析

The Fault Diagnosis and Life Prediction of Type 3NB-1300C Drilling Pump;

3NB-1300C钻井泵故障诊断及寿命预测

Research on and Design of the Driven Section of the Long-Stroke Modular Drilling Pump;

长冲程模块钻井泵动力端研究与设计

Mechanics Analysis of Crank-Connecting Rod in Drilling Pump

钻井泵曲柄连杆机构的受力分析研究

Finite Element Simulation of Crankshaft for 3NB-1300 Drilling Pump

3NB-1300型钻井泵曲轴有限元仿真

EXPERIMENTAL STUDY OF ABRASIVE-CORROSIVE WEAR OF MUD PUMP LINER

钻井泵缸套材料磨料—腐蚀磨损实验研究

The New Process Method of Chevron Gear of ZY3NB-1300 Drilling Pump;

ZY3NB-1300型钻井泵人字齿轮的新型加工方法

The Machining Method for Transition Arc on Drilling Pump Crank using Conventional Lathe

普通车床滚压钻井泵曲轴过渡圆弧方法

AMESim-based simulation of the dynamic characteristics of the drilling pump's hydraulic system

基于AMESim的钻井泵液压系统动态特性仿真

Structure Design and Finite Element Analysis of 1600HP Drilling Pump Crankshaft

新型1600HP钻井泵曲轴的结构设计与有限元分析

Non-impact Working Condition of Drilling Pump Valve Based on the Effects on Stress Concentration

基于应力集中影响的钻井泵阀无冲击工作条件

Study of the Discharge of the Drilling Pump Air Chamber under the Influence of the Pump Valve s Delaying Angle;

泵阀滞后角影响下的钻井泵空气包排出管路流量的研究

The Simulation of High-power Reciprocal Triplex Single Action Drill Pump;

大功率三缸单作用往复式钻井泵计算与仿真分析研究

Feature Extraction in Fault Diagnosis of Pump Valve and GSM-Based Remote Failure Alarm Equipment;

钻井泵阀的故障特征提取与基于GSM的远程故障报警仪

Key techniques and their application for well testing with electric submersible pump on floating drilling vessel

浮式钻井装置电潜泵测试关键技术及其应用

Technique for Detecting the Innovative ESP on Semi-submersible Platform

半潜式钻井平台创新型电潜泵测试工艺