glass transition temperature

用法例句

Amorphous metallic plastic based on cerium is a new class of bulk metallic glasses with an ultralow glass transition temperature much lower than the boiling point of water close to room temperature,at which temperature it′s high strength is comparable to that of super-strength Al-and Mg-based crystalline alloys.

铈基非晶态金属塑料是一种新的块状非晶合金材料,它具有低于开水温度(100℃)的玻璃转变温度。

The supercooled liquid range ΔT_x(=T_x-T_g) and the reduced glass transition temperature T_(rg)=(T_g/T_m) of Fe_(74)Al_4Sn_2P_(10)Si_4B_4C_2 bulk amorphous alloy are 17 K and 0.

用该方法制备的Fe74Al4Sn2P10Si4B4C2 块体非晶合金棒材,其超冷液相区温度ΔTx=17 K,约化玻璃转变温度 Trg=0 637,具有很强的玻璃形成能力。

By the substitution of Si for 1%Ti, the glass transition temperature T_g, crystallization temperature T_ x1 and temperature interval of super cooled liquid region ΔT_x and reduced glass transition temperature T_ rg of the alloy are proved to be changed from 672K, 735K, 63K and 0.

结果表明用1%Si替换Ti后,合金的玻璃转变温度、晶化温度、过冷液相区、约化玻璃温度分别从672K,735K,63K和0。

Microstructure and glass transition temperature of star-shaped styrene-isoprene-butadiene copolymer prepared with N-multi-Li initiator;

氮官能化多锂引发合成星形苯乙烯-异戊二烯-丁二烯共聚物的微观结构和玻璃化转变温度

A new method and equipment of determining glass transition temperature of amorphous macromolecule powders;

非晶态粉体玻璃化转变温度的测量方法与装置

Determining the glass transition temperature of amorphous powders with dilatometer;

用热膨胀法测量非晶态粉体的玻璃化转变温度

The results showed that the glass-transition temperature of thiosulfinates was-36.

本文对采用乙醇浸提法从大蒜中提取硫代亚磺酸酯的玻璃化转变温度和不同温度下的贮存稳定性进行了研究,并探讨了硫代亚磺酸酯不稳定的机理。

It was proved that the introduced flexible isopropylidene could improve the solubility of the polymer and lower the glass-transition temperature.

将含有柔性异亚丙基团的4,4’-(4,4’-异亚丙基二苯氧基)双苯酐(BSAA)与3,3’,4,4’-二苯醚四酸二酐(ODPA)共同作为二酐单体与4,4’-二氨基二苯砜(DDS)共聚得到含砜基的聚酰亚胺,研究了共聚物在多种常用溶剂中的溶解性,并检测了共聚物薄膜的可见光透过性能和玻璃化转变温度,探讨了共聚物的溶解性、光透过性能以及玻璃化转变温度与柔性单体含量之间的关系。

Based on the understanding of the relation between glass transition temperature and stickiness,the reason of sticking of substances containing different kinds of sugars on the drier chamber wall during their spray drying was analysed and six(methods) were suggested to solve this problem,including modification of the substances and improvement of design of the drying process.

从玻璃态转变温度着手,分析了在喷雾干燥中含有不同品种糖类物料粘壁的原因,提出了改性或在设计干燥流程时的6种应对方法。

The glass transition temperature (Tg) of dough was not related to RS type.

结果表明:添加不同种类的抗性淀粉玻璃态转变温度(Tg)基本没有发生变化;而随着添加抗性淀粉量的增加,Tg有轻微的上升。

Does the product Temperature Profile fall within the Engineering based specification for glass transition temperature requirements?

产品温度曲线是否降落到基于工程的玻璃转换温度要求的工程标准?

Plastic Deformation, Glass Transition, and Prediction of Glass Transition Temperature for Metallic Glasses

金属玻璃的塑性变形、玻璃转变以及对玻璃转变温度的预测

liquid column(of liquiding glass thermometer)

（玻璃温度的）液柱

Influence of Annealing Treatment on Glass Transition Temperature

缓冲预处理对玻璃化转变温度的影响

bulb(of liquid-in-glass thermometer)

（玻璃温度计的）感温泡

er with etched stem

附有刻度的玻璃温度计

Effects of Resin Glass Transition Temperature on Tension/Compression Properties of GFRP

树脂玻璃化转变温度对GFRP拉/压性能的影响

Molecular dynamics simulation on the glass transition temperatures of HTPB/plasticizer blends

HTPB/增塑剂共混物玻璃化转变温度的MD模拟

Determining the Glass Transition Temperature of Polymer Films with Real-Time

实时测量聚合物薄膜的玻璃化转变温度

Molecular Simulation on the Glass Transition of Polypropylene

聚丙烯玻璃化转变温度的分子动力学模拟

Molecular simulation of the glass transition of different configuration of polypropylene

不同构型聚丙烯的玻璃化转变温度的分子模拟

Glass transition temperature of polymers in supercritical carbon dioxide

超临界二氧化碳介质中聚合物玻璃化转变温度

Study on glass transition temperature of epoxy matrix modified with nano-Al_2O_3

纳米粒子改性环氧树脂玻璃化转变温度的研究

glass thermistor thermometer

玻璃热敏电阻温度计

safe chamber (of liquid-inglass thermometer)

（玻璃温度计的）安全泡

bore(of liquid-in-glass thermometer)

（玻璃温度计的）内孔

immersion line(of liquid-in-glass thermometer)

（玻璃温度计的）浸没线

expansion chamber(of liquid-in-glass thermometer)

（玻璃温度计的）膨胀室