heatresistant alloy

用法例句

Influence of Rare Earth Element on Oxidation Behavior of Casting Fe-Cr-Ni-Al Heat Resistant Alloy;

稀土元素对铸造Fe-Cr-Ni-Al耐热合金抗氧化性能的影响

Vacuum diffusion welding of refractory steel to heat resistant alloy was investigated in this paper.

针对耐热合金与耐热钢的真空感应扩散焊，研究了扩散焊连接工艺参数对接头变形率的影响、接头变形率与接头性能的关系以及不同接头变形率的微观形态。

Performance compares of brazing filler metal of home and abroad used in heat-resistant alloy;

国产耐热合金钎料与进口钎料的性能比较

Effects of different powders on the properties of heat-resistant alloys prepared by metal injection molding;

不同类型粉末对金属注射成形耐热合金性能的影响

Since heat-resistant alloy has the characteristics of heavy ductility,large plasticity,strong adhesion and low grinding efficiency,we propose a novel design philosophy of electrolysis spark mechanical grinding technique.

针对耐热合金韧性塑性大、粘附性强、磨削效率极低的特点,提出了一种新的电解电火花机械磨削复合加工方法设计思想。

Relationship between the elastic-plastic deformation at the notch root of heat resisting alloy specimen under 450℃ and the fatigue cycle was studied based on digital speckle correlation technique.

应用数字散斑相关技术研究了耐热合金试件在450°环境中缺口根部的弹塑性变形及其与疲劳循环次数的相关性。

Different amounts of mixed rare-earth(RE) metals were added in Fe-Cr-Ni heat-resisting alloy.

在Ｆｅ－Ｃｒ－Ｎｉ奥氏体耐热合金中加入不同量的混合稀土元素，在１０５０℃时进行持久试验。

The vacuum diffusion bonding between K5 heat-resisting alloy and 2Cr12NiWMoV heat-resisting steel was studied,and the effects of the welding parameter T,P and also the interlayer thickness on the microstructure and properties of the joint were investigated.

本文通过Ｋ５耐热合金与２Ｃｒ１２ＮｉＷＭｏＶ耐热钢的真空扩散连接，研究了焊接工艺参数Ｔ、Ｐ、ｔ及中间层厚度对接头组织与性能的影响规律。

In this paper, the development of rapid-solidified heat resistant aluminum alloys are reviewed, and the principle of compositional selecting, preparation methods and reinforcement mechanism are analyzed emphatically.

耐热铝合金由于具有低密度、低价格、良好的耐热和耐腐蚀性能,在航空、航天等工业领域得到了广泛应用。

Experiment Research on the Structure and Properties of Heat Resistance Alloy Ductile Iron

耐热合金球墨铸铁组织和耐热性能的试验研究

Haynes 25 alloy

海纳25钴铬钨镍耐热合金

The Experimental Research on Brazing Process of Fe_3Al and High Temperature Heat-resistant Alloy

Fe_3Al与高温耐热合金的钎焊性能研究

Microstructure and Properties of Heat- and Wear-resistant Al-Si Alloy Prepared by Spray Deposition;

喷射沉积Al-Si系耐热耐磨合金的组织及性能

Study on the Microstructure and Properties of a Special Low-Alloy Steel with Wear-Heat Resistance;

特种低合金耐磨耐热钢组织和性能的研究

Microstructures and Properties of Aluminum Alloy with Heat- and Wear-Resistance Prepared by Spray Forming;

喷射沉积耐热耐磨铝合金的组织和性能研究

Potential development tendencies and research directions about heat-resistant magnesium alloys are proposed.

最后指出发展耐热镁合金的主要方向。

The Microstructure and Properties of Mg-4Al-RE-Ca-Si Heat-resistant Magnesium Alloys;

Mg-4Al-RE-Ca-Si耐热镁合金的组织与性能

The Study on Heat Treatment Technology of 55Cr5SiMoVNi Abrasive Cast Steel;

55Cr5SiMoVNi耐磨合金铸钢热处理工艺的研究

The Study of Casting Magnesium Alloy GYZ103 with High Strength and Heat Resistance;

GYZ103高强耐热铸造镁合金的研究

The Microstructures and Mechanical Properties of Spray Deposited Heat Resistant High-Silicon Aluminum Alloy

喷射沉积耐热高硅铝合金组织及性能

The Research of the Heat Treatment of the Low-alloy High Strength Steel

低合金高强度耐磨钢热处理工艺研究

Development of Alkaline-earth and Heat-resistent AM80-Ca-Sr Magnesium Alloys

AM80-Ca-Sr碱土耐热镁合金研究

Tribological Characteristics of Heat Resistant Magnesium Alloy AZE and AS41

AZE和AS41耐热镁合金的摩擦学行为研究

Study on High Strength Heat-Resistant Al-Si Piston Alloys

高强耐热Al-Si活塞合金的研究

Formation and properties of low expansive and heat-resistant aluminum alloy with high silicon content

耐热低膨胀高硅铝合金的成形与性能

Corrosion-resistant Properties of Hot-dip Galvannealed Steel Sheets

热镀锌合金化钢板的耐腐蚀性能研究

A Study on Hot Workability of Corrosion Resistance Alloy G3,G3-Z and 825

耐蚀合金G3、G3-Z和825热加工性的研究