inert anode

用法例句

Effects of technological conditions on properties of inert anodes of Ag/NiFe_2O_4 cermet;

合成工艺对Ag/NiFe_2O_4惰性阳极性能的影响

Preparation of large scale NiFe_2O_4-10NiO/17Ni type inert anode for aluminium electrolysis;

大尺寸NiFe_2O_4-10NiO/17Ni型金属陶瓷惰性阳极的制备

Effect of on grain composition on properties of inert anodes;

原料粒度组成对铝电解惰性阳极性能的影响

The physical properties of the inert anodes based on perovskite-like Oxygen-Ceramic for Al electrolysis;

铝电解用惰性阳极钙钛矿陶瓷的物性探索

Preparation and properties of fiber/NiFe_2O_4 composite ceramic inert anodes

纤维/NiFe_2O_4复合陶瓷惰性阳极的制备及性能

Cold isostatic press sintering is adopted to prepare Co-Ni-xNiFe2O4 (x=5 %, 10 %, 15 % and 20 wt%) metal based inert anodes for aluminum electrolysis.

采用冷等静压-烧结的方法制备了铝电解用Co-Ni-xNiFe2O4(x=5%,10%,15%,20%,质量分数,下同)金属基惰性阳极,并对试样的导电性和抗腐蚀性进行了研究。

Some new processes and technologies for electronics finishing were introduced, such as wafer plating, electrochemical mechanical polishing, microelectro-mechanical system plating, copper plating using insoluble anode, platinized niobium electrode, lead and cadmium free eleclroless nickel, recycling of alkaline etching solution and reclaiming system of copper.

介绍了电子电镀中的若干新工艺新技术,如芯片电镀、电化学机械研磨、微机电系统电镀、不溶性阳极电镀铜、镀铂铌电极以及无铅无镉中磷光亮化学镀镍、碱性蚀刻液再生和铜回收系统等。

Even current distribution was obtained when insoluble anodes were employed in the plating tank.

在镀槽中采用不溶性阳极可获得均匀的电流分布;采用辅助槽时,能得到综合性能最好的锌-铁合金镀层。

Studies on Spinel-Based Inert Anodes for Aluminium Electrolysis and Oxide Membrane Inert Anodes on the Ni-plate;

铁锌尖晶石基铝用惰性阳极及镍基底氧化物膜惰性阳极的研究

Preparation and Properties Research on Co-Ni-xNiFe_2O_4 Inert Anode;

Co-Ni-xNiFe_2O_4惰性阳极的制备与性能研究

Simulation of heat balance in 5 kA grade aluminum reduction cell with inert anodes

5kA级惰性阳极铝电解槽热平衡仿真

The Preparation Methods and Performance Investigation of Inert Anodes in Aluminium Electrolysis;

铝电解惰性阳极材料的制备方法与性能研究

Preparation and properties of fiber/NiFe_2O_4 composite ceramic inert anodes

纤维/NiFe_2O_4复合陶瓷惰性阳极的制备及性能

One of The Ways to Actualize Industrialization of Inert Anode-Aluminum Electrolysis at Low Temperature

惰性阳极工业化实现的途径之一——低温铝电解

Study on Preparation Inert Anodes Used in Aluminum Electrolysis by Two-steps Sintering;

两步烧结制备铝电解惰性阳极材料的研究

Preparation and Research on Nano-NiO-Cu-NiFe_2O_4 Inert Anode;

纳米NiO-Cu-NiFe_2O_4金属陶瓷惰性阳极的制备与研究

Research of Cermet Inert Anode Materials for Aluminum Electrolysis;

金属陶瓷作铝电解惰性阳极材料的研究

Research on Cu-Al alloy inert anode for aluminium electrolysis in low-temperature system

低温体系中铝电解用Cu-Al合金惰性阳极的研究

The topic of inert anode is attentioned in aluminum electrolysis.

惰性阳极是铝电解行业比较关注且极富挑战性的课题。

The current researches of metal inert anode in China are presented primarily.

着重介绍了国内对金属陶瓷惰性阳极材料的研究现状。

The inert anode of NiFe_2 O_4 spinel is of semi-conductor materials, but it couldn't meet the need of inert anode for aluminum electrolysis.

镍铁尖晶石基惰性阳极属于高温半导体材料,在铝电解过程中其电导率不能满足要求.

Preparation and Investigation of Metals and Metal-Al_2O_3 Inert Anodes for Aluminum Production;

铝电解惰性金属阳极和金属—氧化铝阳极的研制与测试

tungsten inert gas welding

钨极惰性气体保护焊

TIG spot welding

钨极惰性气体保护点焊

gas tungsten arc welding

钨电极惰性气体保护焊

inert gas metal arc welding

金属极惰性气体电弧焊