liquid extract

用法例句

Both the load and the displacement of the ram as well as their relationship during extrusion which directly follows liquid infiltration were experimentally measured and analyzed.

实验测定分析了液态浸渗后直接挤压过程的冲头载荷与位移关系曲线及它们各自随时间的变化，指出了不同工艺条件下所获得的载荷－位移曲线存在很大差异的原因，揭示了工艺参数对液态浸渗后的挤压过程性质有着决定性作用。

A numerical simulation technique based on the stable alternating direction implicit (SADI) method and the upper bound element technique(UBET) is presented and applied to simulations of extrusion directly following liquid infiltration which involves infiltration,solidification, and large plastic deformation in one process.

采用稳定的交替方向隐式（ＳＡＤＩ）有限差分方法、上限元法（ＵＢＥＴ）等数值计算方法模拟了融浸渗、凝固和大塑性变形为一体的液态浸渗后直接挤压的工艺过程。

Mechanical Properties of Alumina Short Fiber Reinforced Aluminium Matrix Composites Fabricated by Extrusion Directly Following infiltration;

液态浸渗后直接挤压铝基复合材料的力学性能

Infiltration process of fiber reinforced magnesium aluminium matrix composites made by liquid infiltration was mainly studied in the paper.

本文着重研究了液态浸渗法制备纤维增强镁、铝基复合材料的浸渗工艺。

Development of the carbon fiber reinforced magnesium matrix composites fabricated by liquid metal infiltration;

液态浸渗法制备碳纤维增强镁基复合材料研究进展

Extraction of concrete of patchouli stem and leaf with supercritical carbon dioxide;

超临界二氧化碳萃取藿香梗和藿香叶浸膏

Analysis of Treemoss Concrete and Absolute Oil and its Application in Tobacco Flavoring;

树苔浸膏、净油香味成分分析及其在卷烟中的应用

Tart Fruit Concrete,Analysis of Volatile Components and Application in Cigarette;

芳酸果浸膏挥发性成分的分析及在卷烟中的应用

The FEM Simulation of the Liquid Infiltration-Extrusion Process Including Damage for Composites;

复合材料液态浸渗挤压有限元模拟及损伤研究

The FEM Simulation of the Liquid Infiltration-Extrusion Process for Composites;

复合材料液态浸渗挤压过程的有限元模拟

Research on the FEM Simulation of the Liquid Infiltration-Extrusion Process for Fabricating MMC;

液态浸渗挤压复合材料过程的有限元模拟

Prediction of surface damage for Al_2O_(3s)f/2A12 composites by liquid infiltration-extrusion process

液态浸渗挤压Al_2O_(3sf)/2A12铝基复合材料表面损伤的预测

liquid infiltration

液体渗入，液体浸油

Numerical Simulation of Isothermal Unsaturated Infiltration of Liquid Aluminum into Fiber Preform

液态铝在纤维预制体中非饱和浸渗的数值模拟

diffusion juice velocity

浸提器中渗出液的速度

Study of Flue Gas Desulfurization by Contained Liquid Membrane

液膜法烟气脱硫试验 Ⅰ.含浸液膜渗透器特性

Study on the Solution Seepage Rule in Low-grade Copper Ore Leaching Process under Stress Wave;

应力波作用下低品位铜矿浸出过程溶浸液渗流特性研究

SO2 separation from flue gas in a hollow fiber contained liquid membrane permeator

中空纤维含浸液膜渗透器烟气脱硫的研究

To become immersed in or as if in liquid.

浸泡浸在液体中、沉浸

Synthesis and Anti-Ablation Proterty Investigation of C/C-TaC Composites;

化学液相浸渗法制备C/C-TaC复合材料及其烧蚀性能研究

The Application Study of Anoxic-submerged Oxic Membrane Bioreactor (A-SOMBR) Treating Landfill Leachate;

缺氧—浸没式好氧膜生物反应器（A-SOMBR）在垃圾渗滤液处理中的应用研究

Fabrication of Al_2TiO_5/Al_2O_3 Composites and Erosion Resistance to Molten Aluminum

钛酸铝/氧化铝复合材料的制备及其抗铝液浸渗性能

Microscopical experimental investigation on complex flow with gas-liquid-solid phase change through porous media

气-液-固变相态复杂渗流微观实验研究

The Static Leaching Character of Copper and Zinc from the Incineration Solid Wastes Fly Ash

垃圾焚烧飞灰中铜、锌在不同浸取液中的静态浸出特性研究

To render an infusion permanently barren, it must be sealed hermetically and boiled.

要长久保持浸液的无生命状态，必须密封和煮沸。

The Topology Optimization of Permeability in Liquid Composite Molding;

液态复合材料模塑成型工艺的渗透率拓扑优化