minimum loading

用法例句

There is limitation that the obtained minimum stability bearing capacity by CIBAM is not the real smallest one for the sheet space structure.

目前工程中主要采用的一致缺陷模态法对板片空间结构进行缺陷稳定分析得到的并不是结构的最小临界荷载。

The smallest load capable of maintaining the bar in a slightly bent form is called the critical or bucking load.

使杆保持稍微弯曲形状的最小载荷称为临界载荷或临界压曲载荷。

maximum all-up weight [loaded condition]

最高承载重量〔载荷状态〕

The maximum load , span of supports YueLong brand type cable tray must be less allowable load and span of supports .

“跃龙”品牌系列电缆桥架的最大载荷、支撑间距应小于允许载荷和支撑荷和支撑跨距。

The maximum load on a bearing should always be smaller than the relief load in order to avoid scuffing.

为了避免划伤，轴承上的最大负荷应该总是小于其卸载负荷。

The maximum load on a bearing should always be smaller than the relief load in order to avoid scuffing and brineling.

为了避免划伤和压坑，轴承上的最大负荷应该总是小于其卸载负荷。

The load reaches a maximum and then drops down.

载荷在达到最大值后下降。

maximum authorized static load on coupling device

作用在挂接装置上的最大允许静载荷

maximum design static laod borne by semi-trailer towing vehicle

半挂牵引车承受的最大静载荷

maximum design static laod on coupling device

作用在挂接装置上的最大设计静载荷

HILOAD(high load): used for carrying or balancing the maximum weight load .

HILOAD（高负载）：用于抓取或平衡最大重量的载荷物。

Base-load power is the minimum required to keep things ticking over-the demands of three o'clock in the morning, or thereabouts.

基本载荷功率是保持正常运转的最小功率——凌晨三点所需的电能，或者与之相当的电能。

The concrete slabs strengthen the torsion buckling capacity of the steel grids and enhance the minimum geometric nonlinear buckling load.

混凝土面板加强了网架的抗扭转屈曲能力，提高了最小几何非线性屈曲荷载。

Loading Conditions. The selection of loading conditions follows the determination of the type and magnitude of the loads that act on the structure.

荷载条件。确定了作用在结构上的荷载类型大小之后，接着要选择荷载条件。

A Study of Computation Model with Load-structure Method for Unsymmetrically Loaded Closely-spaced Tunnel;

偏压小间距隧道的荷载结构特性研究

Base load [electricity]: The minimum load over a given period of time.

基底负荷 [电力]:在一定时期内的最小负荷。

Maximum Loading, Velocity, and PV Values for select kit materials.

所选部件材料的最大载荷、度和极限PV值。

The position of the last crack is marked before unloading the beam.

标出最后一条裂纹的位置，然后卸去载荷。

Optimal input-shaper to suppress payload oscillation of bridge cranes with varying parameters

最优输入整形抑制变参数桥式起重机载荷摆动