penality function

用法例句

SPWM control based on compensation function for matrix converter;

基于补偿函数的SPWM矩阵变换器控制策略

A method to realize non linearity correction and scale transformation with compensation function used in intelligent instrument is presented.

提出了一种在智能仪器中用补偿函数实现非线性误差修正和标度变换的方法。

According to the work condition of one 1450 five-stand tandem cold mill,reduction distribution as decision variable,the penalty function was established,in which rolling pressure distribution ratio was as objective function and the constraint condition of reduction distribution was as penalty term.

根据某1450五机架冷连轧机生产工况,以压下量分配为自变量,以轧制力成比例分配为目标函数,将压下量分配的约束条件作为惩罚项,建立惩罚函数。

The penalty function algorithm is utilized to meet the requirements of essential boundary conditions because the shape function of EFGM fails to satisfy conditions.

将一种新的数值方法无网格伽辽金法(EFGM)用于刚塑性可压缩材料稳态轧制过程的模拟,由于形函数不满足插值条件,采用罚函数法满足本质边界条件;为提高精度,选用矩形影响域的张量积核函数;利用有限元背景网格作为积分单元,对求解域内和边界上采用不同的高斯积分方案·数值计算结果与刚塑性有限元的计算结果和文献中的实验数据吻合较好,说明无网格伽辽金法用于刚塑性可压缩材料轧制过程的可行性和正确性

The penalty function is adopted to impose the essential boundary condition, the tensor product weight function with a rectangular influence domain is chosen, and the finite element background cell is considered as the integration unit.

将无网格再生核质点法(RKPM)用于刚塑性可压缩材料轧制过程的模拟,采用罚函数满足本质边界条件,选用矩形影响域的张量积核函数,利用有限元网格作为积分单元,对求解域内和边界上采用不同的高斯积分方案。

Non-differentiable accurate penalty functions were chosen in treating the constraint equation and the advantages of simulated annealing algorithm was used for reference in determining penalty param.

使用罚函数法对优化模型所包含的约束方程进行转化和处理,使之适用于遗传算法。

By use of penalty functions,an optimization problem with constraints is converted to non-constraint one to establish the combined optimal monitoring model for dam safety.

大坝安全的组合优化监控模型实际上为一带约束的优化问题,将DNA遗传算法应用于大坝安全监控领域中,用罚函数法将有约束的优化问题转换为无约束的优化问题,建立了大坝安全监控的组合优化模型。

Combined with penalty functions,the strategy can guarantee the particles to search in or around the feasible solutions area.

该算法以粒子群算法为基础,提出了新的修补策略对违反各种约束条件的粒子进行积极的修正,并与罚函数技术相结合,使粒子尽可能地在可行解区域或尽量接近可行解的区域内寻优。

This paper adopt SUMT,set the mill′s relatively use of power as the optimization goal.

本文运用罚函数法,以冷连轧机组轧制时电机功率的等相对负荷为目标函数,并用单纯形法进行了加速,所得的轧制规程能够充分地利用现有轧机的生产能力,提高轧机的利用率,为该类型轧机设计提供参考。

Research on multi-modal smooth transition strategy based on penalty function;

基于惩罚函数的多模态平稳过渡策略研究

The Multi-object Path Planning Based on Penalty Function NPGA;

基于惩罚函数NPGA的多目标路径规划

The Dynamic Object Path Planning Based on Penalty Function Niche Pareto Genetic Algorithm;

基于惩罚函数NPGA的足球机器人动态目标规划

This paper inquires into the problem of finding an upper bound for the expectation of recourse function when only first and second momen t constraints are available.

探讨了在随机向量的一阶矩和二阶矩条件下，寻找补偿函数的期望值的一个上界的问题.

Research on the Method of Equalizing Techniques for the Sinc Frequency Response Envelope of DAC

DAC器件Sinc函数衰落的补偿方法研究

Predictive Functional Control Based on Kautz Model With Optimum Compensating Method

基于Kautz模型的优化补偿预测函数控制

Compensation control for dead-zone by adaptive dynamic radial basis function network

自适应动态径向基函数网络死区补偿控制

Solving function Against by Amendment Strategy of Linear Interpolation and Its Application

求函数零点的线性插值补偿策略及其应用

Study on the angular displacement compensation of filter function in the 4f optical system

4f光学系统中滤波函数角位移补偿的研究

Velocity Compensation of Stepped Frequency Signal Based on Evaluation Function

基于评价函数的步进频率信号速度补偿研究

turns correction compensation

匝数更正（补偿）值

The Full Compensation Condition for the Design of Orthogonal Winding in Special Function Resolver

特种函数旋转变压器正交绕组设计用全补偿条件

Study on topographic compensation model of the Okinawa Trough Ⅰ. Calculation of theoretical isostatic response function

冲绳海槽海底地形的补偿模式研究Ⅰ.理论均衡响应函数的计算

A Study of Additional Functions in Non rigid Body Model for Error Compensation of CMMs

坐标测量机非刚体误差补偿模型中附加函数的研究

Theoretical Study on the Apodized Function and Dispersion Compensation of Linearly Chirped Fiber Bragg Grating;

线性啁啾光纤光栅变迹函数及其色散补偿的理论研究

Solving Two-stage Stochastic Programming with Recourse in the Objective Function s Empirical Mean;

利用目标函数的经验均值求解有补偿二阶段问题

Study of the Wetness-Dryness Compensation Characteristics of Luan River Diversion Reservoirs' Inflow Based on Multivariate Copula Functions

基于多元Copula函数的引滦水库径流丰枯补偿特性研究

The choice of smoothing parameter can be automatically obtained by using generalized cross-validation function.

自编程序进行计算，得到了回归参数向量和样条函数的补偿最小二乘估计。

In this paper,the work of the structure parameters of optimization design for Bellow is presented.

以单位重量下波纹管的补偿量最大为目标函数,对波纹管的结构参数进行优化设计。

C-Functions and Merit Functions for Symmetric Cone Complementarity Problems;

对称锥互补问题的互补函数和价值函数研究

Optimal Design for the Compensation Point of Compensation Arm of Pulley Block

滑轮组补偿臂架补偿点的最优数值解法