perturbed dimension

用法例句

The unperturbed dimensions are not constant.

三元体系(高聚物/混合溶剂)性质不能简单地直接从相应的两种二元体系(高聚物/单一溶剂)性质来推演,混合溶剂中排除体积效应往往不是两种单一溶剂中排除体积效应的加权平均,高分子的尺寸除了与单一溶剂-高分子间的相互作用有关外,还受到两种溶剂间的相互作用、高分子的自缔合趋势的影响,在不同的θ溶剂中高分子的无扰尺寸往往不同,两种溶剂间的相互作用是重要的影响因素之一。

The unperturbed dimensions of PαMS PI and PS were calculated by using one mathematical procedure for the extrapolation.

采用体积排斥色谱法 (SEC) /示差折光指数 (RI) /直角激光光散射 (RALLS) /示差粘度 (DV )三检测联用技术 ,在THF为溶剂、2 5℃的条件下表征了聚 (α 甲基苯乙烯 异戊二烯 ) (PαMS PI)二嵌段共聚物 ;计算得到了PαMS PI分子的无扰尺寸A为 0 。

In order to obtain the solution for motion simulation and kinematic analysis of a parallel machine tool without the construction of mathematical model,a method of using assembly constraint and dimension driven function of CAD software was presented.

为了不建立数学模型完成并联机床机构的运动仿真和运动学分析,提出综合利用CAD软件所具有的装配约束和尺寸驱动功能实现运动仿真和运动学分析的方法。

In order to obtain the solution for mapping NC code of a parallel machine tool from virtual axis space to real axis space without the construction of mathematical model, a method of using assembly constraint and dimension driven function of CAD software was presented.

为了有助于并联机床数控系统和仿真系统的开发 ,克服建立数学模型实现机床数控代码虚实映射计算的缺点 ,文章提出了综合利用CAD软件的装配约束和尺寸驱动功能来实现虚实映射的方法。

By using the constraint and dimension driven concept in CAD software, some type of simulation for planar mechanisms is created.

提出用 CAD约束和尺寸驱动技术分析平面机构的运动 。

It narrates two ways of developing plat for SolidWorks,using VB to make parametric design——dimension drive method and program drive method.

介绍了SolidWorks软件的优点;叙述了以SolidWorks为开发平台,应用VB进行参数化设计的两种方法——尺寸驱动法和程序驱动法。

Based on relationship and principle of dimension drive,using CAXA entity design to establish the reusable parametric intellectual pixels.

基于关联和尺寸驱动原理,使用CAXA实体设计,建立可重用的参数化智能图素,调用CAXA实体设计的二次开发函数以及C++标准模板库,通过参数名建立了不同特征尺寸之间的映射关系,以此来驱动相应的尺寸值,在CAXA实体设计上成功实现了自动装配设计功能,并给出应用实例原型。

In this paper,we use modularization,relation,dimension drive and so on technologies,through CAXA Solid Design creating reuseable parameter parts and calling it s second-development interfaces,successfully realize no-constrain smart assembly design function on CAXA Solid Design.

论文基于模块化、关联、尺寸驱动等技术,通过CAXA实体设计建立可重用的参数化模块并调用其二次开发接口,在CAXA实体设计上成功实现了无约束方式的自动装配设计功能,并给出应用的实例原型。

And based on the graph, the parametric design is realized by dimension-driven approach, which includes creation and search of dimension chain and topology chain.

本文围绕二维参数化草图技术,系统地研究了如何向二维草图添加结构约束和尺寸约束,并在图的基础上,通过建立和搜索尺寸链和拓扑链进行尺寸驱动来实现参数化设计。

In this paper,the problems of intelligent dimension-driven in 2-D parametric plotting are discussed.

讨论了利用智能化尺寸驱动技术实现二维参数化绘图中的问题。

In this paper, the problem of intelligent dimension-driven in 2-D parametric plotting is discussed.

讨论了二维参数化绘图中的智能化尺寸驱动问题。

Effect of Conformational Energies on Unperturbed Dimensions of PS and PMA Chain;

PS与PMA链构象能对无扰尺寸的影响

Effect of disubstitute and conformational energy on unperturbed dimension of PDMS chain

侧基和构象能对PDMS分子链无扰尺寸的影响

He was insatiably avaricious; the more he got, the more he wanted to have.

他贪得无厌，得寸进尺。

Dimensional Accuracy Control of Investment Casting Large-Size Turbine Blade--Dimensional Stability of Wax Pattern

大型涡轮叶片无余量精密铸造尺寸精度控制研究——蜡模尺寸稳定性

This chart exceeds the maximum size allowed and cannot be opened.

此图表的尺寸超过上限，无法打开。

full size drawing

原尺寸图，实物尺寸图

foot in the door technique

得寸进尺法得寸进尺法

Effect of Dimension of the Laser Spot on the Foam Screen Interference

激光光斑尺寸对泡沫遮障层干扰效果影响的研究

Invalid input. Please enter a dimensional value with a measurement unit such as '8 in' or '10 mm'.

输入无效。请输入一个带有度量单位的尺寸值，如“8 英寸”或“10 毫米”。

Invalid input. Please enter a positive dimensional value with a measurement unit such as '8 in' or '10 mm'.

输入无效。 请输入一个带有度量单位的正尺寸值，如“8 英寸”或“10 毫米”。

Stretch filament socks, availaBle in one size which, however, fits everyone.

弹力长丝无跟袜，只有一种尺寸但伸缩自如。

The slope of a line is independent of the scales chosen to prepare the graph.

直线的斜率与绘图所选用的比例尺寸无关。

Study on Optimization of Blank Corner Dimensions of Shallow Square Boxes Without Flanges;

无凸缘低盒形件圆角区毛坯尺寸优化的研究

The Study of Dimensional Stability of Seamless Underwear of Coolmax and Core-spun Yarn

Coolmax/包芯纱色织无缝内衣尺寸稳定性研究

Fabric structure and finished size prediction for seamless knitted garments

无缝针织服装面料结构参数与成衣尺寸的预测

The measurements are 108 by 48 by 3 inches.

尺寸是高108英寸，宽48英寸，厚3英寸。

A size of paper, usually18?3 inches or17阶22 inches.

中号尺寸纸张的尺寸，通常为18223英寸或17222英寸

Trimmed size: The size of a printed piece after trimming. Also referred to as Finished size.

裁切尺寸:印刷品裁边后的尺寸。亦称为完成尺寸。