preformed filler metal/ solder preform

用法例句

Study of seam appearance and joint quality in laser brazing for galvanized steel sheets;

镀锌板激光钎焊钎缝成形和接头质量研究

Properties and welding interface characterization of new-type Au-Ag-Ge brazing alloy;

新型Au-Ag-Ge钎料的性能及焊接界面特征

The results indicate that the base metal, 60wt%BNi2+40wt%BNi5 brazing alloy and BNi2 brazing alloy is with similar passivation current, but the initial passivation potential is increased in turn, which demonstrates that their corrosion resistance is decreased in the same sequence.

通过电化学方法研究了钎料分别为60%BNi2+40%BNi5(质量分数)和BNi2的316L不锈钢钎焊接头在人造海水中的耐腐蚀性能。

The vacuum brazing process of 5CrMnMo steel and YG8 hard metal were studied by using CuMnNi filler metal.

选用CuMnNi钎料,研究了5CrMnMo钢与YG8硬质合金的真空钎焊工艺。

The filler metals and fluxes suitabled for 2A50 aluminum alloy brazing were selected according to the feature of 2A50 aluminum alloy and the test of spreadability and clearance fillabitity.

针对2A50铝合金的特点,根据铺展性、填缝性试验,对适合其钎焊的钎料与钎剂作了选择,进行了接头强度试验。

Study on the new type soldering acid and filler metal for restoration of ancient bronze;

古代青铜器修复钎焊用钎剂与钎料的改性研究

Aluminum Alloy Soldering Procedure Research Based on the Sn-Pb-Zn Solder;

基于Sn-Pb-Zn钎料铝合金钎焊工艺研究

The Research on Properties and Bonding Mechanism of Armorphous Cu-P Filler Metals;

非晶Cu-P钎料的性能及钎焊机理研究

Ti-25Cu-25Zr Filler Metal and Pure Titanium Brazed Process

Ti-25Cu-25Zr钎料与纯钛的钎焊工艺

A Study on the Active Brazing of AlN to W-Cu Alloy with Ag-Ti_4 Active Filler Alloy

Ag-Ti_4活性钎料钎焊AlN与W-Cu合金研究

Bonding process of pure copper with amorphous Cu-P interlayer

非晶Cu-P钎料钎焊接头形成过程

Characteristics of Amorphous Brazing Ribbon of Cu-P Based Alloy

非晶态铜磷钎料真空钎焊紫铜的性能

Study on Processing Technology and Brazing Performance of Ag55Cu21Zn17Sn5Ge2 Solder

Ag55Cu21Zn17Sn5Ge2钎料加工工艺及其钎焊性能的研究

Phase Constitution of Soldering Seam and Mechanical Properties of Zn Matrix Filler Metal Soldering Magnesium Alloy AZ31B Joint

Zn基钎料钎焊镁合金AZ31B接头的钎缝物相及力学性能

Research on the New Lead-Free Solder Processing Properties of Brazing and Mechanical Properties;

新型无铅钎料钎焊工艺性及机械性能的研究

The Study of Low-Melting-Point Filler Metal for Al-Si-Mg Series Alloys Vacuum Brazing;

Al-Si-Mg系锻铝合金真空钎焊低熔点钎料的研究

Study on Cu-based Filler Metal Brazed Composite Coating with Particle Reinforced;

铜基钎料钎焊颗粒增强复合涂层的研究

Research on the Properties and the Interfacial Reactions of Sn-Zn-Cu(Ni) Lead-free Solders;

Sn-Zn-Cu（Ni）无铅钎料及其钎焊接头界面反应研究

Effect of Alloy Element Addtion on IMC at the Soldering Interface of Sn-based Binary Solders;

合金元素对二元Sn基钎料钎焊界面IMC的影响

Development of Brazing Grease for Stainless Steel-Aluminum in High Frequency Induction Brazing;

不锈钢—铝高频感应钎焊膏状钎料的研制

Study on Preparation and Brazing Diamond Film of Active Coated Brazing Filler Metal;

活性涂层钎料的制备及其钎焊金刚石膜的研究

The Manufacturing of Filler Metal and the Joining of TiAl Alloys;

TiAl基合金高温钎焊钎料配制及连接工艺研究

Study on Brazing of Cemented Carbide to Steel Using Cu-Based Microcrystalline Brazing Alloy Foils;

基于Cu基微晶钎料的硬质合金/钢钎焊试验研究