去查网 logo

preset bit load

中文翻译预定钻压

同义词释义

    1)preset bit load,预定钻压2)fixed-pressure pretension,定压预紧3)drilling with compressive pre stress,预压应力钻削4)pre-drilling pressure meter test,预钻式旁压试验5)pre-drilling pressure prediction,钻前压力预测6)pre-shaping autoclave,预定形压力装置

用法例句

    Under the condition of fixed-pressure pretension,rotating speed has little effect on the radial stiffness of bearing,however,the axial stiffness and angular stiffness were decreased significantly with the increase of the rotating speed.

    分析结果表明,定位预紧下轴承的径向刚度随转速的增大而增大,而轴向刚度和角刚度随转速的增大,先增大后减小;定压预紧下,轴承径向刚度受转速影响较小,而轴向刚度和角刚度随转速增大急剧下降。

    After the various visual defects during drilling processes were analyzed, the importance of drilling with compressive pre stress was presented.

    根据复合构件加工中的各种缺陷,分析了采用预压应力钻削对改善表面加工质量的重要性。

    This paper briefly introduce the principle of pre-drilling pressure meter test,the analysis of engineering main influent fantors.

    简要介绍了预钻式旁压试验工作原理,对工程程中常见的几种主要影响因素进行分析研究并提出有效的控制,以提高试验结果准确性,为基础设计提供合理准确的设计参数。

    Only through accurate pre-drilling pressure prediction and carefully geologic study, the drilling safety can be assured.

    只有准确地搞好钻前压力预测,搞好油气地质研究,才能确保钻井的安全。

    In view of cost, practicability and maneuverability, the special sintering diamond trepanning drill was developed for drilling ceramic composite components originally.

    根据复合构件加工中的各种缺陷,分析了采用预压应力钻削对改善表面加工质量的重要性。

    Application of formation pressure prediction technology to drilling in Junggar Basin

    地层压力预测技术在准噶尔盆地钻井中的应用

    bit's directional cutting ability

    钻头的定向切削能力

    Research on the Use of Later Low-pressure Grouting to the Drilling Hole Pour Pile;

    钻孔灌注桩低压力后压浆的应用研究

    Study on New Drilling Force Model of Vibration Drilling and Vibration Drilling with Invariable Parameter and Variable Parameter;

    振动钻削新钻削力模型及定、变参数振动钻削的研究

    The Research and Design on Three-Component Piezoelectric Drilling Dynamometer and Torque-Loading Device;

    三向压电钻削测力仪的设计及扭矩加载器的研制

    The Manufacture and Experimental Research on No-centering Four-Component Piezoelectric Drilling Dynamometer;

    无定心四向压电钻削测力仪的研制及其实验研究

    Structural dynamic analysis on ultrasonic driller and drilling experiments

    超声钻结构动力分析与钻削实验研究

    Modeling and Appling of Drilling Speed of Cutting Type PDC Bit;

    切削式PDC钻头钻速方程建立及其应用

    Application of Monitoring Formation Pressure while Drilling in Western Sichuan Basin

    川西地区地层压力随钻监测方法应用

    Construction Measures of Hole Drilling of Prestressed Cable in Loose Deposit

    松散堆积体预应力锚索钻孔施工措施

    Influence of prebored hole measures on compacting effects of jacked piles

    预钻孔措施对静压桩挤土效应的影响分析

    The Analysis of the Drilling Technology of the Cylinder of the Hydraulic Breaker

    液压破碎锤缸体钻削工艺的分析研究

    Development and Performance Test of Piezoelectric Vibrating Drilling Table

    压电式振动钻削工作台及其性能测试

    drill(ing) head

    钻头; 主轴头; 钻床床头箱; 钻削动力头;钻头头部, 钎头

    Using artificial neural networks to predict the cutting force of high-speed milling hardden steel

    应用人工神经网络预测高速铣削淬硬钢的切削力

    hydraulically-loaded pre-stressed rolling mil

    液压加载预应力轧机

    Application of the thrust self-adaptive technology to the mine fully hydraulic drill

    推力自适应技术在煤矿全液压钻机中的应用

全部查询工具

关于我们免责声明联系我们网站地图最近更新

免责说明:本站为非营利性网站,本站内容全部由《去查网》从互联网搜集编辑整理而成,版权归原作者所有,如有冒犯,请联系我们删除。

Copyright © 2020 - 2024 quchaw.com All rights reserved.浙ICP备20019715号