solution heat treatment

用法例句

The influence of solution heat treatment and artificial aging on the microstructure and properties of alloy 2A12 T81 sheet is researched.

研究了固溶热处理及人工时效工艺对２Ａ１２－Ｔ８１铝合金板材的组织与性能的影响规律，指出了适用于１００℃或更高温度下工作的板材的热处理工艺参数。

A novel homogenous precipitation method was developed for the preparation of monodisperse CdS nanoparticles, and the effects of solventthermal treatment on the structure and morphology of CdS were investigated.

采用均相沉淀法制备单分散的CdS纳米微粒,考察了溶剂热处理对CdS结构形貌的影响。

Effects of solventthermal treatment on structure and morphology of ZnS particles are investigated.

采用均相沉淀法制备单分散ZnS纳米微粒,考察了溶剂热处理对ZnS粉末结构形貌的影响。

The microstructure,mechanical properties and crack growth rate of P/M superalloy FGH95 at 1120℃,the cooling rate of 12℃/s,23℃/s,56℃/s,and 1160℃4℃/min1120℃,the cooling rate of 12℃/s solution treatment are studied.

在１１６０℃＋１１２０℃二次固溶热处理后，因晶粒增大并产生部分弯曲晶界，６５０℃屈服强度只降低１３０ＭＰａ（约１２％），而裂纹扩展速率降低１０倍，持久寿命提高近两倍，并且消除了合金的缺口敏感性。

Effects of Hot Extrusion and Solution Treatment on Microstructure and Properties of AZ61 Magnesium Alloy

研究了不同温度下的热挤压工艺以及后续的固溶热处理对AZ61镁合金显微组织和力学性能的影响。

Study on solution heat treatment process for Al-Zn-Mg-Cu alloy thick plate

Al-Zn-Mg-Cu合金厚板固溶热处理工艺研究

The Application of Integrative Solution Heat Treatment Machine for Stainless Steel Panel

不锈钢管屏整体固溶热处理生产线的应用

Solid Solution and Aging Treatment of Thixoforming AZ91D Alloy

触变注射成形AZ91D的固溶和时效热处理

Solution Treatment of the Part of Austenitic Stainless Steel U-pipe

奥氏体不锈钢U形换热管局部固溶处理

HT Sub-factory : complete process of annealing, quenching, tempering, quenching and tempering, solution treatment etc.

热处理厂：可完成退火,正火,回火，调质,固溶处理等工艺.

Microstructure and Properties of AZ31 Processed by Solid-Solution-Large Strain Deformation and Post Heat Treatment

固溶-大应变-后续热处理态AZ31镁合金的组织和性能

Effects of Solution Treatment on Hot Deformation Process and Deformed Microstructure of Mg-2.0%Zn-0.7%Mn Alloy

固溶处理对Mg-2.0%Zn-0.7%Mn合金热变形过程及变形组织的影响

Effects of Hot Extrusion and Solution Treatment on Microstructure and Properties of AZ61 Magnesium Alloy

热挤压及固溶处理对AZ61镁合金组织和性能的影响

Probe into solution treatment on AlSi7MgBe aluminum alloy

AlSi7MgBe铝合金的固溶处理探讨

Effect of solution heat treatment on mircoarc oxidation coatings of AZ91D magnesium alloy

固溶处理对AZ91D镁合金微弧氧化的影响

The Technical Study of 2205 Duplex Stainless Steel Solid Solution Treatment

2205双相不锈钢固溶处理工艺研究

Study on Solution Treatment Process for Mg-6Al-0.5Y-1.0Ce Alloy

Mg-6Al-0.5Y-1.0Ce合金固溶处理工艺的研究

Effect of solid solution treatment on mechanical properties and microstructures of extruded WE43 magnesium alloy

固溶处理对挤压WE43镁合金的影响

Study on Strengthening Solution Treatment for 7050 High Strength Aluminum Alloy

7050高强铝合金强化固溶处理研究

The effect of inverted two-stage aging on microstructure and properties of a Ni base superalloy has been studied.

研究了固溶+两段时效热处理工艺对镍基高温合金组织及性能的影响。

The performance of aluminum alloy after heat treatment in KOH solution

热处理后的铝合金在KOH溶液中的性能

Theory Simulation for Thermodynamic and Solid Solution Properties of Eare Earth Magnesium Alloys;

稀土镁合金的热力学及固溶特性的理论模拟

Effect of solution-ageing treatment on microstructure and properties of forged B93 alloy

固溶-时效处理对B93合金锻件组织与性能的影响