去查网 logo

transverse deformation

中文翻译横向形变

同义词释义

    1)transverse deformation,横向形变2)transverse deformation,横向变形3)transverse deflection,横向变形4)lateral deformation,横向变形5)lateral deformation,横向变形<冶>6)cross-sectional and longitudinal ground settlement,横向与纵向变形

用法例句

    - e curve and less transverse deformation will be.

    结果表明:混凝土强度越高,应力-应变关系线性段比例越高,横向变形越小,说明越接近均质材料。

    ,transverse deformation and the ratio of compressive strength to flexural strength(σ_C/σ_F) in order to evaluate the effect of SAE latex on the toughness of cement mortar.

    采用横向变形和压折比这2种方法表征了苯丙乳液水泥砂浆的韧性,研究了苯丙乳液对水泥砂浆韧性的影响,并着重探讨了这2种表征方法的关系。

    Based on the construction of the North Channel Bridge of Zhu-jiang Huangpu Bridge,the transverse deformation behavior of segments were investigated by mixed finite element model with consideration of the influenced factors such as non-uniform temperature,the location and stiffness of longitudinal truss-like spacer plate.

    以黄埔大桥北汊桥独塔双索面扁平钢箱梁斜拉桥为工程背景,采用混合单元建立三维有限元模型,分析了梯度温度变化、桁架式纵隔板位置和刚度对悬拼施工中钢箱梁的横向变形问题的影响,并提出了一些相应的优化措施。

    Two laser displacement sensors were also used to detect transverse deflection of the saw blade and sawing profile on .

    该文应用远红外温度传感器测试锯片沿半径方向的温度分布,两个激光位移传感器分别测量了锯片在外边缘模拟加热条件下锯片的横向变形和锯切工件上的锯痕高度,研究分析了不同温度分布、转速、进给速度、径向槽分布和适张状态下锯片横向变形与锯痕高度的关系。

    In this paper, the nonlinear transverse deflection or buckling is analyzed for unsymmetrical composite laminates under loads in plane by means of the generalized Fourier series method.

    本文利用广义富里叶级数法对非对称复合材料层板在面内载荷作用下的非线性横向变形或屈曲问题进行了分析。

    Analysis on the impact of high-speed railway fastener to lateral deformation of rail;

    高速铁路扣件对钢轨横向变形影响分析

    The paper indicates that when the fuel is over loaded, the lateral deformation of shell should not be ignored.

    指出了在FAE战斗部壳体设计中,燃料轴向过载时产生的横向变形对壳体的作用是不能忽视的,这个力和过载加速度引起的轴向力对壳体的作用在壳体的设计中起着主导作用,是设计壳体的主要依据。

    It gives the range that confines the lateral deformation of the central concrete.

    对钢管砼侧压效应系数及约束效应系数进行了理论分析 ,建立了二者的关系 并提出了能有效限制核心砼横向变形的约束效应系数的范

    STUDY ON CUTTING FORCE IN RECTANGULAR GROOVE CUTTING AND SIDE DEFORMATION OF CHIP

    矩形槽切削的切削力及切屑横向变形的研究

    Vibration equations of the thick flat shells by transverse shearing deformation

    考虑横向剪切变形厚扁壳的动力方程

    Large Deformation of Elastic Thin Beam-Plate with One Side Fixed in a Cross-Flow

    弹性梁式薄板在横向绕流中的大变形

    Model Analysis on Change Rate of Horizontal Acceleration in Line Shape Comfortableness of Road

    道路线形舒适性中横向加速度变化率模型分析

    Transverse/cross/lateral contraction deformation:The component contracts in the upright direction of weld after weiding.

    横向收缩变形:构件焊后在垂直焊缝方向上发生的收缩。

    Displacement fundamental equations of the thick plates bending and the general solution to simply supported rectangular plates by transvers shearing defomation

    考虑横向剪切变形厚板弯曲的位移型方程及简支矩形板的一般解

    Regulation mega frame structure behavior result in wind pressure along with horizontal position variety influence

    风压沿建筑物横向变化对规则巨型框架结构变形的影响

    transverse moving blade shaper

    横向移动刮刀式整形机

    multiple beam lateral-shear interferometer

    多光束横向切变干涉仪

    free to deflect [unbraced]

    自由变位〔无横向支撑〕

    The Effects of Taizhong-Jinjiang Transverse Structure Belt on Cenozoic Diastrophism and Earthquake of Fujian Province

    台中—晋江横向构造带对福建现代地壳变形和地震的影响

    Extended 2-D Numerical Modal Considering Transverse Transport of Sediment and Bank Deformation in Bend Flow Based on Moving Coordinate

    移动坐标下考虑弯道横向输沙及河岸变形的平面二维数学模型

    horizontal rolled position

    转动横向焊位置(指管子环形接头横向焊

    horizontal fixed position

    固定横向焊位置(指管子环形接头横向焊

    Lateral Buckling Analysis of Thin-Walled Structures with Irregular Cross Section;

    不规则横截面形状薄壁结构的横向稳定分析

    It has an expanded network composed of superfine fibers and joints.

    膨体聚四氟乙烯生料带并具有韧性好、纵向强度高、横向易于变形的特点。

    Spatial Variation of the Morphometric Parameters of Simple Transverse Dunes over the Tall-complex Longitudinal Ridges in the Hinterland of the Taklimakan Desert

    塔克拉玛干沙漠腹地高大复杂纵向沙垄区简单横向沙丘形态特征的空间变异

    In this paper, the effect of feeding speed on peen-forming is studied thorugh experiments, which shows that chordwise peen-forming deformation is the exponential function of feeding speed.

    试验研究了送进速度与抛丸成形之间的关系,结果显示,横向抛丸变形是送进速度的指数函数。

全部查询工具

关于我们免责声明联系我们网站地图最近更新

免责说明:本站为非营利性网站,本站内容全部由《去查网》从互联网搜集编辑整理而成,版权归原作者所有,如有冒犯,请联系我们删除。

Copyright © 2020 - 2024 quchaw.com All rights reserved.浙ICP备20019715号