vitreouschina sanitaryware

用法例句

Application of additive in the slurry of sanitary ware;

卫生陶瓷泥浆添加剂的应用研究

The super-smooth glaze of sanitary ware was obtained by once-fired technique.

采用一次烧成工艺制备了卫生陶瓷用超平滑釉(Ra≤10。

The present developing status and standards of sanitary ware industry are summarized in this paper.

归纳了当今卫生陶瓷工业的发展现状和水平 ,对窑炉产业提出了的新要求 ,分析了某一新型窑炉的特点 ,对发展我国陶瓷窑炉产业提出了建

Making use of perlite as main raw materials,low firing temperature sanitary pottery body has been developed through cross experiment design.

以低质珍珠岩为主要原料,通过正交设计,研制出低温烧成卫生瓷坯料配方,针对其坯体色深、白度低的情况,成功研制出La2O3基高强乳浊釉对其有效遮盖。

The Xingtai soda,feldspar,and Part quartz were rePlaced by the local pottery stone,waste materials of the factory in Producing sanitary pottery.

利用本地瓷石和厂内废料代替河北邢台碱、长石和部分石英生产卫生瓷，可降低产品烧成温度，提高产品质量。

The applications of Guangxi-Qidao clay in ceramic paste and glaze of sanitary wares are studied on the basis of the study about the clay’s raw material capability.

在对广西气刀土原料性能研究的基础上,进行了在卫生陶瓷坯料、釉料中的应用研究。

Through the adjust ion of Si/Al proportion and the doping of talc and matting agents,a calcium mat glaze for sanitary wares has been developed in this experiment.

本试验通过调整卫生陶瓷釉浆中的Si/Al,引入滑石和无光剂 ,成功地制备出卫生陶瓷钙质无光釉。

The slip properties of the pressure casting on sanitary wares are studied,through a series of test,the influence of the slip properties of the slip casting process are discussed.

研究了卫生陶瓷压力注浆成型的泥浆性能 ,通过一系列试验 ,讨论了泥浆性能对压力注浆成型的影响。

Study on the key CAD technologies of sanitary products;

卫生瓷产品CAD系统关键技术的研究

This paper sets forth the key technique and developing method of CAD for sanitary products .

阐述了卫生瓷产品CAD系统的开发方法及其采用的关键技术。

The cross experimental research of Gel-casting technology on sanitary by using hydroxymethylacrylamide(HMAM)as monomerand ceric ammonium nitrate as initiator,N,N,N',N'-tetramethylethylenedimaine as catalyst,N,N'-methylenebisacrylamide(MBAM)as cross-linkeris conducted.

本文采用正交实验方法,以羟甲基丙烯酰胺为单体,硝酸铈铵为引发剂,N,N,N',N'-四甲基乙二胺为催化剂,N,N'-亚甲基双丙烯酰胺为交联剂,研究了卫生陶瓷凝胶注模成型工艺,并探讨了不同工艺条件(单体加入量、引发剂加入量、催化剂加入量、交联剂加入量等因素)对卫生陶瓷料浆凝胶注模成形后坯体的干燥速率、收缩率、干燥强度以及综合性能指标的影响规律。

Gelcasting technology of sanitary using acrylamide as monomer and (NH 4) 2S 2O 8-NaHSO 3 as redox initiator was studied.

采用凝胶注模成型方法 ,以丙烯酰胺为单体 ,( NH4 ) 2 S2 O8-Na HSO3为引发剂 ,研究了卫生陶瓷凝胶注模成型工艺。

The Life Cycle Assessment of Sanitary Ware in China

我国卫生陶瓷生命周期影响评价研究

Test methods for water absorption for architectural and sanitary ceramics

GB/T2579-1989建筑卫生陶瓷吸水率试验方法

DISCUSSABOUT COMPETING ENVIRONMENT OF CHINESE CONSTRUCTION SANITARY CERAMIC ENTERPRISE;

中国建筑卫生陶瓷企业竞争环境浅析

Life Cycle Assessment of the Typical Sanitary Ware Company of China

我国卫生陶瓷典型企业生命周期评价研究

An Analysis on Prsent Quality Situation of Sanitary Wares in Guangdong Province;

近期广东省卫生陶瓷产品质量状况及分析

New Tend of Competition on the Constructing Sanitation Ceramics Product Market ,Culture Business;

建筑卫生陶瓷产品市场竞争新趋势—文化营销

A VAST PROSPECT FOR THE EXPORT OF CHINESE MEDIUM AND HIGH - GRADE SANITARY PORCELAIN;

我国扩大出口中高档卫生陶瓷前景广阔

Superheated Steam Drying Control System Design Based on PLC

基于PLC的卫生陶瓷过热蒸汽干燥控制系统设计

A Method of 3D Solid Modeling and Development of CAD System for Sanitary Ceramic Products;

卫生陶瓷产品三维实体建模方法与CAD系统的研制

The Research on How the Ceramic Industry to Meet the New Energy-consuming Standard--The Avenue Exploring under the Instruction of Recycling Economy;

新标准下建筑卫生陶瓷行业应对能耗问题的研究——循环经济思想指导下的途径探索

ceramic sanitary fixture for connection to water or sewage systems

陶瓷卫生器具,用于连接供水排水系统

ceramic sanitary fixture of porcelain or china indoor for connection to water or sewage systems

室内陶瓷卫生器具,瓷制,用于连接供水排水系统

Live in the water--With water for clues to the thoughts of ceramic sanitary products design

水中生息——以水为线索的陶瓷卫浴产品设计思考

fixture for indoor plumbing, ceramic of porcelain or china for connection to water or sewage systems

陶瓷室内卫生设备,瓷或白坯资制,用于连接供水排水系统

fixture for indoor plumbing, ceramic (excl. of porcelain or china) for connection to water or sewage systems

陶制室内卫生设备（瓷或白坯瓷制的除外）,用于连接供水排水系统

Yatao Ceramics Co., Ltd. is a ceramic sanitary ware manufacturer, which has producing experience for many years.

潮州市亚陶瓷业有限公司是一家具有多年生产经验的卫浴陶瓷生产商。

From the born day, HONGYU sanitary wares have been devoting to the perfect quality, modeling the life by creative and artistic points of view.

弘宇陶瓷从它诞生的那一天起，就致力捍卫极致的卫浴品质，以创新及艺术的角度塑造生命。

Bolo Bathing Necessities Ceramics Co., Ltd.

上海宝路卫浴陶瓷有限公司