welding speed

用法例句

Relation of welding speed and heat input at aluminum alloy friction stir welding

铝合金搅拌摩擦焊时焊接速度与热输入的关系

The impact of different welding speeds on the low-cycle corrosion fatigue life of 12Cr18Ni10Ti steel sheets in corrosive media was studied and the results showed that,at the same welding process parameters,the low-cycle corrosion fatigue life of steel sheets welded at the speeds ranging from 60 m/hr.

文章研究了不同的焊接速度对12Cr18Ni10Ti薄板在腐蚀性介质中的低用腐蚀疲劳寿命的影响。

The effect of processing parameters including laser power,welding speed and protection gas flow on the welding quality was researched in this paper.

探讨了焊接工艺参数包括激光功率、焊接速度、正反面保护气体流量对焊接效果的影响。

A detailed CO2 laser-MIG (metal inert gas) hybrid welding experiment was carried out on the 4mm mild plates to discuss the relation of laser power, arc current, the maximum welding speed and the weld shaping, as well as the joint gap.

对此,采用4mm厚Q235钢板进行了CO2激光-MIG(metalinertgas)复合焊接研究,探讨了激光功率、电弧电流对最大焊接速度的影响及其和接头间隙对焊缝成形的影响规律。

Improvement on high-speed welding technology of robot;

弧焊机器人高速焊接工艺改进

The hardware/software configurations, organization and property of high-speed welding system and the technology of high-speed welding for profiled rolle steel was introduced in this paper.

介绍了多源钨极氩弧焊异型钢材高速焊接系统软 /硬件设计、构成、性能和高速焊接工艺 ,此系统在型材轧制生产线上得到了应

The theory of stability of a liquid with free surface is applied to understand the ‘humping’ phenomenon in bead formation during high speed welding.

应用具有自由表面的流体稳定性理论，解释了高速焊接时驼峰焊道的产生机理，并通过对熔池形成过程的实时图像采集对该理论进行了验证。

If the generation mechanism of weld bead defects is understood and some suppression measures are proposed, then some improvements can be made for conventional arc welding process so that low-cost and widely used high speed welding process is obtained.

如果针对常用的电弧焊,研究焊接速度提高时焊缝成形缺陷的形成机理,进而提出一定的抑制措施,在此基础上对常规电弧焊工艺做适当改进,得到一种成本低廉、可广泛推广的高速焊接工艺,对于大幅度提高焊接生产效率具有重要的理论意义和工程实用价值。

And it is proved that hard arc is more stable under lower voltage,which is suitable for high speed welding.

在数字控制绝缘栅极晶体管逆变电源平台基础上,研究了短路过渡高速焊接工艺的参数匹配和波形控制规律。

The Modelling of Temperature Control by Speed in HF Welding Pipe Process and its Temperature Control System

高频直缝焊管焊接速度控温建模及控温系统

Research on Weld Toughness of X80 Heavy Section Pipeline Steel at Different Welding Speeds

X80厚壁管线钢不同焊接速度下焊缝韧性研究

Relation of welding speed and heat input at aluminum alloy friction stir welding

铝合金搅拌摩擦焊时焊接速度与热输入的关系

Features,high thermal efficiency,deep melting,fast welding with good effect,shaping well,low labor strength.

热效率高，焊深大，焊接速度快，焊接效果好，成型效果好，成型美观，劳动强度低。

And the weld width decrease with welding speed being increased.

而焊接速度的增大,焊缝正面和背面的熔宽明显减小。

The welding quality is directly influenced by the speed control of welding dolly in the automation welding system.

焊接自动化系统中的焊接小车的速度控制直接影响焊接质量。

Study on Combustion Velocity and Temperature of Non-electric Welding Material

无电焊接材料的燃烧速度和燃烧温度研究

Quick: Don't need to weld and galvanize, the setting time is 3 times quicker than the flange connect fitting.

快速不需焊接和再镀锌，安装速度比法兰连接管件快3倍以上。

Research of Triple-Wire High Speed GMAW Welding Technology on Ship Plates

船用钢三丝高速GMAW焊焊接工艺研究

Effect of Welding Angle on Fatigue Performance of Welded Structure

焊接角度对焊接结构疲劳性能的影响

The Strength and Loading Capacity of SSAW Pipe Welding Joint

螺旋焊管焊接接头的强度和承载能力

Using the heat of welding to vapour water, cooling rates are lowered on the weld bead and heat -affected zone.

利用焊接时的加热使水汽化，不仅使焊道而且使热影响区的冷却速度减慢。

Study on Influence of Welding Process Parameters on Strength of Welded Joint

焊接工艺参数对焊接接头强度的影响研究

Study of Length Calculation of Three Side Welded Lap;

三面围焊搭接角焊缝长度计算的探讨

Affect of Different Solder on Intension of Cu/W Brazing Joint

不同焊料对Cu/W钎焊接头强度的影响

The influence of SMT reflow soldering temperature curve on the welding quality

SMT再流焊温度曲线对焊接质量的影响

What Does the Quality Welding Have to Do Wifh the Width and Height of Pipeline Manual Arc Welding

管道手工电弧焊焊接宽度、高度与焊接质量的关系

Preliminary Analysis of Bead Defects Formation Mechanism in High-speed GMAW

高速GMAW焊接焊缝成形缺陷机理的初步分析